Author Topic: Installing Turbo C on Windows 7 / Vista  (Read 1366 times)

administrator

  • Administrator
  • Full Member
  • *****
  • Posts: 69
Installing Turbo C on Windows 7 / Vista
« on: November 11, 2010, 09:46:20 am »
You can also visit http://softwareandfinance.com/TCPP_Step_by_Step.html

Step1:

Download and install DosBox 0.74 from the following location (www.dosbox.com)

http://sourceforge.net/projects/dosbox/files/dosbox/0.74/DOSBox0.74-win32-installer.exe/download

Step2:
Open the DosBox 0.74 options it is nothing but a text file. At the end of the file add the lines,

mount c c:\
mount d d:\




Step3:

Download the Turbo C++ .Zip file from the following location

http://www.bestfreewaredownload.com/freeware/t-free-turbo-c--freeware-flggsdpz.html

Direct link is given below:

http://www.sammisoft.com/soft-128137.download

and save the .ZIP file into d:\install directory and then unzip the .zip file into the same folder.


Step4:

Click on DosBox .74 from start menu -> programs -> Dos Box .74. It will open two command prompt and one is status window and the one will allow you to type commands. It is same as your Dos Prompt. From here goto your d:\install directory and run the Turbo C++ Setup program.

You are all set..!

 


Disclaimer: This web site is for educational and informational purposes only. Click here to read the Disclaimer.
Content copyright 2010-2014. Kathiresan. All rights reserved.
This page is using SMF version 2.0.1